How to Measure
- Use a measuring tape to measure the width and height of your wall. Do not include the ceiling cornice or the floor skirting board in your measurement.
- To help with installation we will automatically add on an extra 20mm to the right side panel and 30mm to the length of each panel to compensate for walls not being perfectly square. Walls come in a variety of different shapes and sizes below is a guide on how to measure some of these.
Normal shaped wall
Use a tape measure and write down the full width and height of the wall. Please pay attention to not include the ceiling cornice (pink area in the example) or the floor skirting board (dark brown area in the example) during measurement. Make sure you double check the measurements as we need the exact dimensions to print out your wallpaper.
Wall with obstacles
If your wall has an obstacle like a door, power point or a window please still measure the full width and height of your wall. During installation you will cut around the obstacle and trim the excess paper. If you are unsure how to measure your wall you can send us a picture of the wall and we’ll help you out!
Sloped shaped wall
If your wall has an angle in it, write down the full width and height of the wall. We only print out wallpapers in square or rectangle shapes. This means you can cut the excess fabric during installation. Please do not include the ceiling cornice or floor skirting board in your measurements.